multi-component FTIR gas analyzer
Industrial multi-component FTIR gas analyzer for continuous emission monitoring applications, integrated into a Continuous Emission Monitoring system (CEMS II e). It can be used to measure up to 50 components simultaneously
Product Description
Industrial multi-component FTIR gas analyzer
Gasmet CX4000 is an industrial multi-component FTIR gas analyzer for continuous emission monitoring applications, integrated into a Continuous Emission Monitoring system (CEMS II e). It can be used to measure up to 50 components simultaneously, and additional gases can be easily added without any hardware changes. The corrosion-resistant sample cell is heated up to 180 °C, which makes CX4000 an ideal tool for analyzing trace concentrations of pollutants in wet, corrosive gas mixtures. That’s why CX4000 is widely used in combustion research to study fuels and catalysts.
Certified solution for industrial users
The CX4000 is fully equipped for fixed installations and it offers versatility and high performance for all industrial users. Gasmet CX4000 has both TÜV (17th BlmSchV) and MCERTS certificates. The analyzer is also compliant with U.S. EPA 40 CFR Part 60 Appendix B Performance Specification 15.
Key advantages
EN 15267 certified
U.S. EPA 40 CFR Part 60 Appendix B PS15 compliant
Simultaneous measurement of all gases
Specifications
3.2.1 General Parameters
Measurement principle: FTIR (Fourier Transform Infrared)
Performance: Simultaneous analysis of up to 50 gas compounds
Response time: <120 s, depending on the gas flow and measurements time
Operating temperature: 0 – 40 °C, optimum 15 – 25 °C, non-condensing
Storage temperature: -20 – +60 °C, non condensing
Power supply: 100-240 VAC / 50 - 60 Hz
3.2.2 Spectrometer
Interferometer: Gasmet Technologies Oy GICCOR interferometer
Resolution: Recommended 8 cm-1 or 4 cm-1
Scan frequency: 10 spectra/s
Aperture: 1’’
Detector: Thermo-electrically cooled MCT or DTGS
IR-source: Ceramic, SiC, 1550 K temperature
Beam splitter: BaF2 or ZnSe
Window material: BaF2 or ZnSe
Wave number range: 900 – 4200 cm-1 with BaF2/MCT
700 – 4200 cm-1 with ZnSe/DTGS
3.2.3 Sample Cell
Structure: Multi-pass, fixed path length 0.4m 0.6m, 1.2m, 2.0m, 2.5m, 5.0m or 9.8m Single-pass, fixed path length 4 cm or 10 cm
Material: 100 % gold-coated aluminium
Mirrors: Fixed, protected gold coating
Volume: Multi-pass 0.22 litres or 1.07 litres, Single-pass 0.013 or 0.031 litres
Connectors: Swagelok 6 mm or 1/4"
Gaskets: Viton o-rings. Kalrez o-rings are optional.
Temperature: 180 °C, maximum
Maximum sample gas pressure: Two (2) bars
Flow rate 1-5 l/min
Required gas filtration: Filtration of particulates (2 microns)
Sample condition: Non-condensing
Related Products
Continuous Emission Monitoring (CEMS)
Gasmet Technologies Oy., Finland · CEM II
Continuous Emission Monitoring System CEMS II e offers modular and TÜV…
Continuous Mercury Monitoring System
Gasmet Technologies Oy., Finland · CMM
Continuous Mercury Monitoring solution – the CMM – is TÜV and MCERTS c…
Long-term Dioxin Sampling System
Gasmet Technologies Oy., Finland · GT90 Dioxin+
Long-term sampling of dioxins and furans. The MCERTS certified system …
Multi Gas FTIR Analyzer
Gasmet Technologies Oy., Finland · Model GT 7000
The GT7000 Tellus is a next-generation rack-mountable FTIR gas analyze…